SEE THE KIK® DIFFERENCE YOURSELF!
	See available size, KIK® HS Drill Bit                                                                                           KIK® HS Drill Bit - FISH TAPE Type, 8-1/4 Long See available set,   9+2 pc KIK® HS Drill Bit                                                                               11 pc FISH TAPE Combo, 8-1/4 Long                   32 pc Multi-Use Combo                                            7+1 pc KIK® Spade Bit Combo	REVOLUTIONARY MULTI-EDGE BIT (Pat.Pend.) CUTS FASTER. SMOOTHER
Common drill bit Brad point bit KIK® BIT 1. Only two cutting     edges. 2. Single edge flutes     clog easily. 3. Melts plastic while     drilling. 4. Drills thin metal     leaving burr. 5. Blind Holes are     round bottomed. 6. Point walks on     smooth surface. 1. Six cutting edges     but only two edges     for bore diameter. 2. Single edge flutes     clog easily. 3. Melts and shreds     plastics. 4. Tears sheet metal. 5. Tip tang prevents     shallow blind drilling     in thin materials. 6. Works on wood only. 1. Six cutting edges for     smoother, faster     boring in wood. 20%     more cutting edge     means longer life. 2. Double edges flutes     for fast chip removal. 3. Drills plastic cleanly     without causing     melting. 4. Drills aluminum and     metal sheet cleanly     with less heat and     small chips-no     clogging. 5. Nearly flat bottom     blind holes. 6. Will not "walk" on     smooth surface.                8 lbs Pressure 1000 RPM Drill Press

Printable Version